Meta Quest 3 et Quest Pro Accessoires VR

Affichage 25-48 de 65 article(s)

View of Swing It VR golf club for Meta Quest 3 Carbon Armature and Grey PLA cups Left hand

In stock

Club de golf

Club de golf SWINGiT pour Quest 3

Impress your friends in Walkabout with your mastery of the golf club.Practices your swing like a pro. Go for the hole-in-one.

View

In stock

Pistolet et arme à feu pour VR

Bipode pour sniper

Any HMD

BIPOD_

39,00 €

You see that pixel 1km away in your game? That's your target and you will hit it. Perform the best long range shot. Increase your gunstock weight for more realism and immersion. Lie on the floor or lean against a piece of furniture to add stability and feel like a real marksman.

Side view of a carbon MK2 stock spare part without slider

In stock

Pièces de rechange

Butée de la crosse MK2 sans le glissière ajustable

Any HMD

STOCK_STATIC_MK2_HANDLE_parent

33,75 €

Want a new color for your adjustable MK2 shoulder stock?Remove the slider from the old one and place it on the new one. It's that simple.

View

In stock

Coupelles bottom-mounted

Coupelles pour manettes de Quest 3

Meta Quest 3 / 3S / Pro

CUP_Q3_parent

(8 avis)

30,00 €

Slot your HMD controllers inside meticulously shaped controller mounts.Clip the magnetic ones on your MagTube, ForceTube, Starter or ProTas. Fasten them on your SwingIt Golf club or ProSaber.Switching to a new brand of VR controllers? Get a new set of controller mounts and replace the old ones.

View

In stock

Accessoires VR

ProStraps pour Quest 3

Meta Quest 3 / 3S / Pro

PROSTRAPS_Q3_parent

(10 avis)

30,00 €

Keep your VR controllers nestled comfortably in the palm of your hands. Play longer. No more flyng controllers. Don't worry about your friends and family dropping them.

View

In stock

ForceTube

Ensemble semelle et marteau du module ForceTube

Any HMD

FTB_BUTT_PAD_ASSEMBLY_parent

30,00 €

This is a replacement part for our ForceTube haptic module. This is the part that presses on your shoulder and hammers when the module kicks.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

View

In stock

ProTas

Base joystick ProTas sans coupelle pour manette

Any HMD

PTS_BASE_SOLO_parent

(1 avis)

30,00 €

This is the ProTas joystick without controller mount.To benefit from the intercompatibility of our magnetic products (MagTube, ForceTube, Starter, ProTas), you must already own the bottom-mounted magnetic controller mounts (MagCups).

View

In stock

SWINGiT Golf

Club de golf SWINGiT sans coupelle

Any HMD

SWING_GOLF_HANDLE_ARMCARBLK_

30,00 €

The SwingIt Golf Club without controller mount. For those who already own one, just fasten your non-magnetic mount to it.

In stock

ProVolver

Support de poignée pour le pistolet ProVolver

Any HMD

PVLR_WRIST_SUPPORT_CAR_

(1 avis)

25,00 €

Play longer sessions of intense firefight by adding a wrist support to your ProVolver haptic handgun. Also improves stability when you aim with an outstretched arm. Compatible with left and right ProVolver rear mount. Easily clip/unclip it with its magnetic bracket.

In stock

ProVolver

Extension avant de ProVolver sans coupelle

Any HMD

PVLR_FRONT_EXT_NOCUP_parent

20,00 €

A replacement part for the ProVolver front mount support. Need a magnetic bottom-mounted mount (MagCup) to operate. You can purchase the ProVolver front extension with a controller mount directly.

View

In stock

Fusil et arme d'assaut

Crosse d'épaule statique MK1

Any HMD

STOCK_STATIC_MK1_parent

20,00 €

The classic shoulder stock for the MagTube or shoulder extension for the Starter and ProVolver.Simple, lightweight, sturdy.

View

In stock

Pièces de rechange

Monture pour coupelle

Any HMD

BRACKET_parent

19,00 €

The magnetic bracket that holds the controller and its bottom-mounted magnetic mount on our gun frames. Add a second smooth mount to the front part of your VR gun stock (MagTube, ForceTube) to give you two possible positions for your front hand. Generally, the furthest for rifles and the closest for machine pistols. This way, you can quickly switch from...

View

In stock

Pièces de rechange

Connecteur d'extension crosse

Any HMD

STOCK_EXT_CONNECTOR_parent

19,00 €

This is a spare part for the shoulder extension upgrade for the Starter and ProVolver.If you are under our 2 years warranty, contact our Customer Service.

View

In stock

ForceTube

Marteau du module haptique ForceTube

Any HMD

FTB_HAMMER_parent

18,00 €

This is a replacement part for our ForceTube haptic module. This is the hammer that kicks your shoulder.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

View

In stock

ForceTube

Semelle du module haptique ForceTube

Any HMD

FTB_BUTT_PLATE_parent

18,00 €

This is a replacement part for our ForceTube haptic module: the part pressing on your shoulder when aiming and guiding the hammer.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

View

In stock

Pièces de rechange

Tube

Any HMD

TUBE_parent

14,40 €

Easily switch from chrome to carbon set, to reduce the weight and improve the look of your accessories.Carbon tubes are 60% lighter than chrome tubes.

View

In stock

Pièces de rechange

Paire d'aimants

Any HMD

AIMANT_PAIR_

10,00 €

This is a spare part for our magnetic controller mounts: a pair of neodymium magnets. You shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

An oil flask and 8 oring and 1 smooth washer and 1 notched washer

In stock

Pistolet et arme à feu pour VR

Kit de maintenance pour gunstock

Any HMD

MAINTENANCE_KIT_

10,00 €

Looks like it's time to oil up!After prolonged (months) or intensive use of your gunstock, you may need to replace some of the gaskets. Here's what you need.

In stock

ProTas

Boitier pour le cœur flexible du joystick ProTas

Any HMD

PTS_CASE_parent

10,00 €

To change the color of your ProTas case or replace an old one.

View

In stock

ProTas

Cœur flexible du joystick ProTas

Any HMD

PTS_FLEX_MAG_

10,00 €

A spare part for the ProTas joystick: the flexible core.If you are under our 2 years warranty, contact our Customer Service and we will gladly replace it.

In stock

ProVolver

Culasse du ProVolver

Any HMD

PVLR_SLIDE_parent

10,00 €

Spare part for ProVolver haptic module slide.The slide mimics the actions of a real one on semi-automatic or automatic pistol to provide additional movement and amplitude to the haptic recoil.We will gladly help you if you contact our Customer Service.

View

In stock

ProVolver

Support de poignée sans monture pour le ProVolver

Any HMD

PVLR_STAB_SPARE_CAR_

10,00 €

The ProVolver Wrist support is composed of a 'wrist handle' (this spare part) and a bracket.Easily replace the handle.For left and right hand.

A black sling for rifle support with one point of attachement

In stock

Pistolet et arme à feu pour VR

Bandoulière pour confort et sécurité avec fusil VR

Any HMD

SLING_parent

(2 avis)

10,00 €

Add more stability when playing with a VR gunstock with additional contact points.Let it rest on your torso when you unclip the controller mounts for secondary actions.The 2 points sling can be placed on 2 sling rings or you can connect the two points to just one ring.

View

In stock

Pièces de rechange

Rechange du patin ajustable pour crosse MK2

Any HMD

STOCK_STATIC_MK2_SLIDER_CAR_

10,00 €

This is spare parts for the MK2 shoulder stock: the adjustable slider.To be honest, you shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

Meta Quest 3 et Quest Pro Accessoires VR

Club de golf SWINGiT pour Quest 3

Bipode pour sniper

Butée de la crosse MK2 sans le glissière ajustable

Coupelles pour manettes de Quest 3

ProStraps pour Quest 3

Ensemble semelle et marteau du module ForceTube

Base joystick ProTas sans coupelle pour manette

Club de golf SWINGiT sans coupelle

Support de poignée pour le pistolet ProVolver

Extension avant de ProVolver sans coupelle

Crosse d'épaule statique MK1

Monture pour coupelle

Connecteur d'extension crosse

Marteau du module haptique ForceTube

Semelle du module haptique ForceTube

Tube

Paire d'aimants

Kit de maintenance pour gunstock

Boitier pour le cœur flexible du joystick ProTas

Cœur flexible du joystick ProTas

Culasse du ProVolver

Support de poignée sans monture pour le ProVolver

Bandoulière pour confort et sécurité avec fusil VR

Rechange du patin ajustable pour crosse MK2

Inscris-toi à notre newsletter et reçois un code de réduction de 10% sur ta première commande.

A propos de nous

Accessoires VR

Player corner

Business corner

©2016-2025 - ProTubeVR™ | CGV | Livraison et douanes | Garantie | Retour et remboursement