Liste des produits de la marque Any HMD

ProTubeVR has a policy of a high degree of repairability and customization. Our VR accessories are compatible with the controllers of most HMD VRs thanks to controller mounts, which you can clip on with a magnet or fasten to your accessories. In this part of our catalog, you'll find products, upgrades and spare parts that can be used whatever your HMD is.

Affichage 1-24 de 47 article(s)

Right top view of a pair of magnets for ProTubeVR accessories with screw and nut

In stock

Pièces de rechange

Paire d'aimants

This is a spare part for our magnetic controller mounts: a pair of neodymium magnets. You shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

Side view of folded articulated chrome armature for rifle gunstock vr without shoulder-butt with magnetic bracket

In stock

Fusil et arme d'assaut

Armature de fusil sans crosse ni coupelle

ARMATURE_ALONE_parent

The bare gun stock frame, without controller mounts nor shoulder stock nor sling.Mostly for those who want to customize it. The carbon armature is 60% lighter than the chrome one.

View

A retracted bipod for rifle

In stock

Pistolet et arme à feu pour VR

Bipode pour sniper

You see that pixel 1km away in your game? That's your target and you will hit it. Perform the best long range shot. Increase your gunstock weight for more realism and immersion. Lie on the floor or lean against a piece of furniture to add stability and feel like a real marksman.

Front view of Bolt M6x08

In stock

Pièces de rechange

Boulon

The bolts are spare parts for our products. You shouldn't have to buy it. We put it there to show that our products are repairable and what spare parts we use. You can check the dimensions and format to buy it at a tool shop. It will be less expensive, to be honest. Contact our Customer Service and we will gladly help you.

View

side view of a notched bracket to mount on Virtual Realy gunstock rear part

In stock

Pièces de rechange

Monture pour coupelle

The magnetic bracket that holds the controller and its bottom-mounted magnetic mount on our gun frames. Add a second smooth mount to the front part of your VR gun stock (MagTube, ForceTube) to give you two possible positions for your front hand. Generally, the furthest for rifles and the closest for machine pistols. This way, you can quickly switch from...

View

left view of black carbon butt pad spare parts for ForceTube haptic Explorer module

In stock

ForceTube

Ensemble semelle et marteau du module ForceTube

FTB_BUTT_PAD_ASSEMBLY_parent

This is a replacement part for our ForceTube haptic module. This is the part that presses on your shoulder and hammers when the module kicks.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

View

left view of black carbon hammer spare parts for ForceTube haptic Explorer module

In stock

ForceTube

Marteau du module haptique ForceTube

FTB_HAMMER_parent

This is a replacement part for our ForceTube haptic module. This is the hammer that kicks your shoulder.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

View

left view of black carbon butt plate spare parts for ForceTube haptic Explorer module

In stock

ForceTube

Semelle du module haptique ForceTube

FTB_BUTT_PLATE_parent

This is a replacement part for our ForceTube haptic module: the part pressing on your shoulder when aiming and guiding the hammer.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

View

Side view of 3 allens key of different sizes allen hex key

Pièces de rechange

Clés Allen

We use Allen keys to tighten tube connectors and mounting brackets. We supply them with all products that require them.You shouldn't have to buy it. We put it there to show that our products are repairable. You can check the dimensions and format to buy it at a tool shop. It will be less expensive, to be honest.If you still need it, contact our Customer...

View

An oil flask and 8 oring and 1 smooth washer and 1 notched washer

In stock

Pistolet et arme à feu pour VR

Kit de maintenance pour gunstock

MAINTENANCE_KIT_

Looks like it's time to oil up!After prolonged (months) or intensive use of your gunstock, you may need to replace some of the gaskets. Here's what you need.

Left view of a square nut M4

In stock

Accueil

Écrou

The nuts are spare parts for our products. You shouldn't have to buy it. We put it there to show that our products are repairable. You can check the dimensions and format to buy it at a tool shop. It will be less expensive, to be honest. Contact our Customer Service and we will see how to help you.

View

left view of oring toric joint

Pièces de rechange

Joint Torique O'ring

The toric joint (O'ring) are spare parts for our products.To be honest, you shouldn't have to buy it. We wanted to show our product are easily repairable. Contact our Customer Service and we will see how to help you.

View

Side view of L-nut for prostraps attachement

In stock

ProStraps

Écrou en L pour ProStraps

This L-shaped nut is for the ProStrap attachements. You shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will see how to help you.

In stock

ProTas

Base joystick ProTas sans coupelle pour manette

PTS_BASE_SOLO_parent

(1 avis)

This is the ProTas joystick without controller mount.To benefit from the intercompatibility of our magnetic products (MagTube, ForceTube, Starter, ProTas), you must already own the bottom-mounted magnetic controller mounts (MagCups).

View

Top view of a protas vr hotas grey casing spare part without straps or flexible bracket for controller mount

In stock

ProTas

Boitier pour le cœur flexible du joystick ProTas

PTS_CASE_parent

To change the color of your ProTas case or replace an old one.

View

Front view of the black flexible core of the ProTas joystick

In stock

ProTas

Cœur flexible du joystick ProTas

A spare part for the ProTas joystick: the flexible core.If you are under our 2 years warranty, contact our Customer Service and we will gladly replace it.

In stock

ProTas

Pad adhérent du ProTas

This adhesive pad for the ProTas base is sticky enough for the ProTas joystick to act as a wall mount for your controllers on a smooth surface.Wash it under water to renew its stickiness like day one.It leaves no traces.

In stock

ProTas

Bandes velcro du ProTas

A pair of velcro straps for the ProTas joystick.Some players need it to go around a huge arm chair or part of their desk.

Side view of a clamp to make the connexion between the provolver controller mount and the provolver haptic module

In stock

ProVolver

Fixations du ProVolver

A pair of clamps to connect the ProVolver controller rear mount to the ProVolver haptic module.You shouldn't have to buy it. We put it there to show that our products are repairable.If you are under our 2 years warranty, contact our Customer Service and we will gladly replace them.

View

Right view of a SMG shoulder stock upgrade for Provolver haptic pistol with chrome armature and grey static MK1 stock

In stock

ProVolver

Extension crosse du ProVolver

PVLR_EXT_parent

Upgrade your ProVolver haptic pistol to a carbine or SMG with a shoulder stock.Combined with the front extension, you get a haptic gun stock ready to mimic your virtual rifles and assault weapons.You can even have dual haptic feedback with a ForceTube module hammering your shoulder and the ProVolver kicking in your hand.

View

Side view of a magnetic front support to put a left-hand controller mount for a right-handed ProVolver rear-cup

In stock

ProVolver

Extension avant de ProVolver sans coupelle

PVLR_FRONT_EXT_NOCUP_parent

A replacement part for the ProVolver front mount support. Need a magnetic bottom-mounted mount (MagCup) to operate. You can purchase the ProVolver front extension with a controller mount directly.

View

A ProVolver haptic module without rear cup side right view

In stock

ProVolver

Module haptique du ProVolver sans coupelle arrière

PVLR_MOD_EXP_CAR_

The ProVolver Haptic module without the controller rear mount.To be honest, there is very few reason for you to take it without its rear mount, since our warranty covers you for a long time.If you are a VR game studio, contact us directly for a dev'kit.

side view of a carbon black female picatini rail of three centimeters with two holes inside it

In stock

ProVolver

Rail du ProVolver

PVLR_RAIL_parent

The ProVolver's rails connect the rear mount to the haptic module, while the Provolver's clamps secure this connection. The female rail is designed directly onto the rear mounts. The male rail is screwed onto the haptic module. Contact our Customer Service and we will see how to help you.

View

Side view of provolver slide spare part

In stock

ProVolver

Culasse du ProVolver

PVLR_SLIDE_parent

Spare part for ProVolver haptic module slide.The slide mimics the actions of a real one on semi-automatic or automatic pistol to provide additional movement and amplitude to the haptic recoil.We will gladly help you if you contact our Customer Service.

View

1
2

Product added to wishlist

L'utilisation de notre site signifie que
vous acceptez nos conditions conditions
et l'utilisation de cookies.