Liste des produits de la marque Any HMD

ProTubeVR has a policy of a high degree of repairability and customization. Our VR accessories are compatible with the controllers of most HMD VRs thanks to controller mounts, which you can clip on with a magnet or fasten to your accessories. In this part of our catalog, you'll find products, upgrades and spare parts that can be used whatever your HMD is.

Affichage 1-47 de 47 article(s)

Right top view of a pair of magnets for ProTubeVR accessories with screw and nut

In stock

Pièces de rechange

Paire d'aimants

This is a spare part for our magnetic controller mounts: a pair of neodymium magnets. You shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

Side view of folded articulated chrome armature for rifle gunstock vr without shoulder-butt with magnetic bracket

In stock

Fusil et arme d'assaut

Armature de fusil sans crosse ni coupelle

ARMATURE_ALONE_parent

The bare gun stock frame, without controller mounts nor shoulder stock nor sling.Mostly for those who want to customize it. The carbon armature is 60% lighter than the chrome one.

View

A retracted bipod for rifle

In stock

Pistolet et arme à feu pour VR

Bipode pour sniper

You see that pixel 1km away in your game? That's your target and you will hit it. Perform the best long range shot. Increase your gunstock weight for more realism and immersion. Lie on the floor or lean against a piece of furniture to add stability and feel like a real marksman.

Front view of Bolt M6x08

In stock

Pièces de rechange

Boulon

The bolts are spare parts for our products. You shouldn't have to buy it. We put it there to show that our products are repairable and what spare parts we use. You can check the dimensions and format to buy it at a tool shop. It will be less expensive, to be honest. Contact our Customer Service and we will gladly help you.

View

side view of a notched bracket to mount on Virtual Realy gunstock rear part

In stock

Pièces de rechange

Monture pour coupelle

The magnetic bracket that holds the controller and its bottom-mounted magnetic mount on our gun frames. Add a second smooth mount to the front part of your VR gun stock (MagTube, ForceTube) to give you two possible positions for your front hand. Generally, the furthest for rifles and the closest for machine pistols. This way, you can quickly switch from...

View

left view of black carbon butt pad spare parts for ForceTube haptic Explorer module

In stock

ForceTube

Ensemble semelle et marteau du module ForceTube

FTB_BUTT_PAD_ASSEMBLY_parent

This is a replacement part for our ForceTube haptic module. This is the part that presses on your shoulder and hammers when the module kicks.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

View

left view of black carbon hammer spare parts for ForceTube haptic Explorer module

In stock

ForceTube

Marteau du module haptique ForceTube

FTB_HAMMER_parent

This is a replacement part for our ForceTube haptic module. This is the hammer that kicks your shoulder.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

View

left view of black carbon butt plate spare parts for ForceTube haptic Explorer module

In stock

ForceTube

Semelle du module haptique ForceTube

FTB_BUTT_PLATE_parent

This is a replacement part for our ForceTube haptic module: the part pressing on your shoulder when aiming and guiding the hammer.If you are still under our 2 years warranty, contact our Customer Service and we will gladly replace it.

View

Side view of 3 allens key of different sizes allen hex key

Pièces de rechange

Clés Allen

We use Allen keys to tighten tube connectors and mounting brackets. We supply them with all products that require them.You shouldn't have to buy it. We put it there to show that our products are repairable. You can check the dimensions and format to buy it at a tool shop. It will be less expensive, to be honest.If you still need it, contact our Customer...

View

An oil flask and 8 oring and 1 smooth washer and 1 notched washer

In stock

Pistolet et arme à feu pour VR

Kit de maintenance pour gunstock

MAINTENANCE_KIT_

Looks like it's time to oil up!After prolonged (months) or intensive use of your gunstock, you may need to replace some of the gaskets. Here's what you need.

Left view of a square nut M4

In stock

Accueil

Écrou

The nuts are spare parts for our products. You shouldn't have to buy it. We put it there to show that our products are repairable. You can check the dimensions and format to buy it at a tool shop. It will be less expensive, to be honest. Contact our Customer Service and we will see how to help you.

View

left view of oring toric joint

Pièces de rechange

Joint Torique O'ring

The toric joint (O'ring) are spare parts for our products.To be honest, you shouldn't have to buy it. We wanted to show our product are easily repairable. Contact our Customer Service and we will see how to help you.

View

Side view of L-nut for prostraps attachement

In stock

ProStraps

Écrou en L pour ProStraps

This L-shaped nut is for the ProStrap attachements. You shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will see how to help you.

In stock

ProTas

Base joystick ProTas sans coupelle pour manette

PTS_BASE_SOLO_parent

(1 avis)

This is the ProTas joystick without controller mount.To benefit from the intercompatibility of our magnetic products (MagTube, ForceTube, Starter, ProTas), you must already own the bottom-mounted magnetic controller mounts (MagCups).

View

Top view of a protas vr hotas grey casing spare part without straps or flexible bracket for controller mount

In stock

ProTas

Boitier pour le cœur flexible du joystick ProTas

PTS_CASE_parent

To change the color of your ProTas case or replace an old one.

View

Front view of the black flexible core of the ProTas joystick

In stock

ProTas

Cœur flexible du joystick ProTas

A spare part for the ProTas joystick: the flexible core.If you are under our 2 years warranty, contact our Customer Service and we will gladly replace it.

In stock

ProTas

Pad adhérent du ProTas

This adhesive pad for the ProTas base is sticky enough for the ProTas joystick to act as a wall mount for your controllers on a smooth surface.Wash it under water to renew its stickiness like day one.It leaves no traces.

In stock

ProTas

Bandes velcro du ProTas

A pair of velcro straps for the ProTas joystick.Some players need it to go around a huge arm chair or part of their desk.

Side view of a clamp to make the connexion between the provolver controller mount and the provolver haptic module

In stock

ProVolver

Fixations du ProVolver

A pair of clamps to connect the ProVolver controller rear mount to the ProVolver haptic module.You shouldn't have to buy it. We put it there to show that our products are repairable.If you are under our 2 years warranty, contact our Customer Service and we will gladly replace them.

View

Right view of a SMG shoulder stock upgrade for Provolver haptic pistol with chrome armature and grey static MK1 stock

In stock

ProVolver

Extension crosse du ProVolver

PVLR_EXT_parent

Upgrade your ProVolver haptic pistol to a carbine or SMG with a shoulder stock.Combined with the front extension, you get a haptic gun stock ready to mimic your virtual rifles and assault weapons.You can even have dual haptic feedback with a ForceTube module hammering your shoulder and the ProVolver kicking in your hand.

View

Side view of a magnetic front support to put a left-hand controller mount for a right-handed ProVolver rear-cup

In stock

ProVolver

Extension avant de ProVolver sans coupelle

PVLR_FRONT_EXT_NOCUP_parent

A replacement part for the ProVolver front mount support. Need a magnetic bottom-mounted mount (MagCup) to operate. You can purchase the ProVolver front extension with a controller mount directly.

View

A ProVolver haptic module without rear cup side right view

In stock

ProVolver

Module haptique du ProVolver sans coupelle arrière

PVLR_MOD_EXP_CAR_

The ProVolver Haptic module without the controller rear mount.To be honest, there is very few reason for you to take it without its rear mount, since our warranty covers you for a long time.If you are a VR game studio, contact us directly for a dev'kit.

side view of a carbon black female picatini rail of three centimeters with two holes inside it

In stock

ProVolver

Rail du ProVolver

PVLR_RAIL_parent

The ProVolver's rails connect the rear mount to the haptic module, while the Provolver's clamps secure this connection. The female rail is designed directly onto the rear mounts. The male rail is screwed onto the haptic module. Contact our Customer Service and we will see how to help you.

View

Side view of provolver slide spare part

In stock

ProVolver

Culasse du ProVolver

PVLR_SLIDE_parent

Spare part for ProVolver haptic module slide.The slide mimics the actions of a real one on semi-automatic or automatic pistol to provide additional movement and amplitude to the haptic recoil.We will gladly help you if you contact our Customer Service.

View

Left view of a provolver handgun wrist support spare part without magnetic bracket

In stock

ProVolver

Support de poignée sans monture pour le ProVolver

PVLR_STAB_SPARE_CAR_

The ProVolver Wrist support is composed of a 'wrist handle' (this spare part) and a bracket.Easily replace the handle.For left and right hand.

Support de poignée pour le pistolet ProVolver Any HMD - 1

In stock

ProVolver

Support de poignée pour le pistolet ProVolver

PVLR_WRIST_SUPPORT_CAR_

(1 avis)

Play longer sessions of intense firefight by adding a wrist support to your ProVolver haptic handgun. Also improves stability when you aim with an outstretched arm. Compatible with left and right ProVolver rear mount. Easily clip/unclip it with its magnetic bracket.

Left view of a tube connector with external notches

In stock

Pièces de rechange

Raccords pour les tubes

The joints of our accessories.Some players need it to create their specific configurations.

View

A black sling for rifle support with one point of attachement

In stock

Pistolet et arme à feu pour VR

Bandoulière pour confort et sécurité avec fusil VR

(2 avis)

Add more stability when playing with a VR gunstock with additional contact points.Let it rest on your torso when you unclip the controller mounts for secondary actions.The 2 points sling can be placed on 2 sling rings or you can connect the two points to just one ring.

View

Front view of a black plastic ring to slide over a tube to attach the shoulder strap's carabiner

In stock

Pièces de rechange

Anneau pour bandoulière

This is spare part for our gunstocks: the sling ring. To be honest, you shouldn't have to buy it.We put it there to show that our products are repairable. Unless you want to customize your gunstock of course?If you are under our 2 years warranty, contact our Customer Service.

starter extension chrome armature grey mk1 stock side view

In stock

Starter

Extension SMG avec crosse pour le gunstock Starter

(1 avis)

Upgrade your Starter CQB gunstock to adapt to any situation. Close, mid and long-range. You will dominate them all. It transforms your one-tube stock into a two-tube stock, halfway to the MagTube with its 3 parts.

View

side view of a notched bracket for provolver shoulder extension with a transparent tube armature

In stock

Pièces de rechange

Connecteur d'extension crosse

STOCK_EXT_CONNECTOR_parent

This is a spare part for the shoulder extension upgrade for the Starter and ProVolver.If you are under our 2 years warranty, contact our Customer Service.

View

Side view of forcetube explorer 5 joules recoil haptic module

In stock

Accessoires VR avec haptique

Crosse haptique ForceTube avec recul

STOCK_HAPTIC_FTB_parent

(1 avis)

Upgrade your gunstock with this impressive haptic feedback shoulder stock. Feel your game and the impact (literally) of your ingame actions.

View

Side view of original MK1 static non-haptic grey vr gun buttstock for shoulder point of contact

In stock

Fusil et arme d'assaut

Crosse d'épaule statique MK1

STOCK_STATIC_MK1_parent

The classic shoulder stock for the MagTube or shoulder extension for the Starter and ProVolver.Simple, lightweight, sturdy.

View

Side view of a carbon MK2 stock spare part without slider

In stock

Pièces de rechange

Butée de la crosse MK2 sans le glissière ajustable

STOCK_STATIC_MK2_HANDLE_parent

Want a new color for your adjustable MK2 shoulder stock?Remove the slider from the old one and place it on the new one. It's that simple.

View

Side view of carbon MK2 adjustable shoulder stock for vr gunstock

In stock

Fusil et arme d'assaut

Crosse d'épaule MK2 ajustable

STOCK_STATIC_MK2_parent

(2 avis)

Find the perfect alignement when aiming down sight (ADS).Finetune your VR gunstock by adjusting the cheek-rest up and down.Make sure your favorite phrase doesn't become Can it wait for a bit? I am in the middle of some calibrations.

View

Front view of the MK2 adjustable stock carbon black slider spare part

In stock

Pièces de rechange

Rechange du patin ajustable pour crosse MK2

STOCK_STATIC_MK2_SLIDER_CAR_

This is spare parts for the MK2 shoulder stock: the adjustable slider.To be honest, you shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

left view of a SWINGiT golf security clamp to secure the controller in the golf club handle

In stock

SWINGiT Golf

Fixations du club de golf SWINGiT

SWING_GOLF_CLAMP_CAR_

These are spare parts for our products: security clamp for the SwingIt Golf club.To be honest, you shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will gladly replace it if you are under our 2 years warranty.

SWINGiT golf edition handle covered in black foam without controller mount

In stock

SWINGiT Golf

Club de golf SWINGiT sans coupelle

SWING_GOLF_HANDLE_ARMCARBLK_

The SwingIt Golf Club without controller mount. For those who already own one, just fasten your non-magnetic mount to it.

the rear view of a notched magnetic tenon with a sight on the magnet

In stock

Pièces de rechange

Tenon pour support de manettes

The retainers are the components linking the controller mounts to the brackets.To be honest, you shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will see how to help you.

View

Left view of a set of chrome tubes composed of 130mm and 200mm and 250mm tubes for Pro Tube Gun stock

In stock

Pièces de rechange

Tube

Easily switch from chrome to carbon set, to reduce the weight and improve the look of your accessories.Carbon tubes are 60% lighter than chrome tubes.

View

In stock

Accessoires VR avec haptique

Clé USB Bluetooth

To pair your haptic module with your computer.We offer one with every haptic module purchased, as well as the USB-C cable.

Top view of an USB-C cable for ForceTube and ProVolver haptic gun

In stock

Accessoires VR avec haptique

Cable USB-C

To recharge your haptic module. We offer one with every haptic module purchased, as well as the USB Bluetooth Dongle.

left view of a notched washer for vr gun stock and accessories articulations

In stock

Pièces de rechange

Rondelle

The washers facilitate the rotation of the different connector articulations and protect them. To be honest, you shouldn't have to buy it. We wanted to show our product are easily repairable. Contact our Customer Service and we will see how to help you.

View

Side view of the Ragesaq collab stock MK2

In stock

Séries Signature

Crosse ajustable MK2 x Ragesaq

STOCK_STATIC_STAMK2_COLLAB_Ragesaq_

We’ve teamed up with ragesaq the VR virtuoso known for his epic VR FPS gameplay and BeatSaber skills! Check it with ragesaq's links 🎮✨ We created a custom-designed shoulder stock, featuring his signature name. Get ready to level up your VR setup and show your support for ragesaq. #RagesaqCollab #VRGear #LevelUpYourGame #VRFPS

Side view of the VRML collab stock MK2

In stock

Séries Signature

Crosse ajustable MK2 x VRML

STOCK_STATIC_STAMK2_COLLAB_VRML_

Trouvez l'alignement parfait lorsque vous visez en bas de la ligne de mire (ADS), tout en supportant la VR Master League ! Ajustez votre gunstock VR en réglant l'appui-joue de la crosse vers le haut et vers le bas.

Crosse ajustable MK2 x Xyrage Any HMD - 1

In stock

Séries Signature

Crosse ajustable MK2 x Xyrage

STOCK_STATIC_STAMK2_COLLAB_XYRAGE_

We’ve teamed up with Xyrage, known for his lives on Twitch and Youtube videos dedicated to VR FPS. Upgrade your gunstock (MagTube or Starter with extension or ProVolver with Extension) with this adjustable MK2 shoulder stock featuring Xyrage's signature and colors. Find the perfect alignement when aiming down sight (ADS). Finetune your VR gunstock by...

Side view of the SCOPEOG collab stock MK2

In stock

MagTube

Shoulder stock MK2 x ScopeOG

STOCK_STATIC_STAMK2_COLLAB_SCOPEOG_

We’ve teamed up with ScopeOG, known for his lives on Ghosts of Tabor. Check out his precision sniper shots at over 300m with a MagTube gunstock on his TikTok, Twitch and Youtube videos. Upgrade your gunstock (MagTube or Starter with extension or ProVolver with Extension) with this adjustable MK2 shoulder stock featuring ScopeOG' signature and colors....

Product added to wishlist

L'utilisation de notre site signifie que
vous acceptez nos conditions conditions
et l'utilisation de cookies.