Home

Showing 97-120 of 146 item(s)

In stock

ProTas

Flexible core for ProTas

Any HMD

PTS_FLEX_MAG_

$ 10.79

A spare part for the ProTas joystick: the flexible core. Contact our Customer Service and we will gladly replace it.

In stock

ProTas

Adherent pad for ProTas

Any HMD

PTS_PAD_

$ 6.48

This adhesive pad for the ProTas base is sticky enough for the ProTas joystick to act as a wall mount for your controllers on a smooth surface. Wash it under water to renew its stickiness like day one. It leaves no traces.

In stock

ProTas

Velcro strips for ProTas

Any HMD

PTS_STRAP_

$ 6.48

A pair of velcro straps for the ProTas joystick. Some players need it to go around a huge arm chair or part of their desk.

In stock

ProVolver

Clamp for ProVolver

Any HMD

PVLR_CLAMP_

$ 6.48

A pair of clamps to connect the ProVolver controller rear mount to the ProVolver haptic module. You shouldn't have to buy it. We put it there to show that our products are repairable. If you are our warranty, contact our Customer Service and we will gladly replace them.

View

In stock

ProVolver

Shoulder stock extension for ProVolver

Any HMD

PVLR_EXT_parent

$ 53.97

Upgrade your ProVolver haptic pistol to a carbine or SMG with a shoulder stock. Combined with the front extension, you get a haptic gun stock ready to mimic your virtual rifles and assault weapons. You can even have dual haptic feedback with a ForceTube module hammering your shoulder and the ProVolver kicking in your hand.

View

In stock

ProVolver

ProVolver Front Extension without cup

Any HMD

PVLR_FRONT_EXT_NOCUP_parent

$ 21.59

A replacement part for the ProVolver front mount support. Need a magnetic bottom-mounted mount (MagCup) to operate. You can purchase the ProVolver front extension with a controller mount directly.

View

In stock

ProVolver

ProVolver haptic module without rear cup

Any HMD

PVLR_MOD_EXP_CAR_

$ 323.83

The ProVolver Haptic module without the controller rear mount. To be honest, there is very few reason for you to take it without its rear mount, since our warranty covers you for a long time. If you are a VR game studio contact us directly for a dev'kit.

side view of a carbon black female picatini rail of three centimeters with two holes inside it

In stock

ProVolver

Rail for ProVolver

Any HMD

PVLR_RAIL_parent

$ 6.48

The ProVolver's rails connect the rear mount to the haptic module, while the Provolver's clamps secure this connection. The female rail is designed directly onto the rear mounts. The male rail is screwed onto the haptic module. Still under warranty? Contact our Customer Service and we will see how to help you.

View

In stock

ProVolver

Slide for ProVolver

Any HMD

PVLR_SLIDE_parent

$ 10.79

Spare part for ProVolver haptic module slide. The slide mimics the actions of a real one on semi-automatic or automatic pistol to provide additional movement and amplitude to the haptic recoil. We will gladly help you if you contact our Customer Service.

View

In stock

ProVolver

Support handle without bracket for ProVolver

Any HMD

PVLR_STAB_SPARE_CAR_

$ 10.79

The ProVolver Wrist support is composed of a 'wrist handle' (this spare part) and a bracket. Easily replace the handle. For left and right hand.

In stock

ProVolver

Wrist Support for ProVolver handgun

Any HMD

PVLR_WRIST_SUPPORT_CAR_

(2 reviews)

$ 26.99

Play longer sessions of intense firefight by adding a wrist support to your ProVolver haptic handgun. Also improves stability when you aim with an outstretched arm. Compatible with left and right ProVolver rear mount. Easily clip/unclip it with its magnetic bracket.

Left view of a tube connector with external notches

In stock

Spare parts

Tube connectors

Any HMD

RACCORD_parent

$ 8.64

The joints of our accessories. Some players need it to create their specific configurations.

View

A black sling for rifle support with one point of attachement

In stock

VR Gunstock and firearm

Sling for gunstock comfort and security

Any HMD

SLING_parent

(2 reviews)

$ 10.79

Add more stability when playing with a VR gunstock with additional contact points. Let it rest on your torso when you unclip the controller mounts for secondary actions. The 2 points sling can be placed on 2 sling rings or you can connect the two points to just one ring.

View

In stock

Spare parts

Sling ring

Any HMD

SP_AnneauFlex

$ 6.48

This is spare part for our gunstocks: the sling ring. To be honest, you shouldn't have to buy it. We put it there to show that our products are repairable. Unless you want to customize your gunstock of course? If you are under our 2 years warranty, contact our Customer Service.

In stock

Starter

SMG and Rifle shoulder stock extension for Starter

Any HMD

STA_EXT_parent

(1 review)

$ 53.97

Upgrade your Starter CQB gunstock to adapt to any situation. Close, mid and long-range. You will dominate them all. It transforms your one-tube stock into a two-tube stock, halfway to the MagTube with its 3 parts.

View

In stock

Spare parts

Stock Extension Connector

Any HMD

STOCK_EXT_CONNECTOR_parent

$ 20.51

This is a spare part for the shoulder extension upgrade for the Starter and ProVolver. If you are under our 2 years warranty, contact our Customer Service.

View

In stock

VR Haptic Feedback Accessories

Haptic Stock ForceTube with recoil and rumble

Any HMD

STOCK_HAPTIC_FTB_parent

(1 review)

$ 290.36

Upgrade your gunstock with this impressive haptic feedback shoulder stock. Feel your game and the impact (literally) of your ingame actions.

View

In stock

Rifle and Assault Weapon

Static shoulder stock MK1

Any HMD

STOCK_STATIC_MK1_parent

$ 21.59

The classic shoulder stock for the MagTube or shoulder extension for the Starter and ProVolver. Simple, lightweight, sturdy.

View

In stock

Spare parts

Butt plate without slider for the Adjustable Stock MK2

Any HMD

STOCK_STATIC_MK2_HANDLE_parent

$ 36.43

Want a new color for your adjustable MK2 shoulder stock? Remove the slider from the old one and place it on the new one. It's that simple.

View

In stock

Rifle and Assault Weapon

Adjustable shoulder stock MK2

Any HMD

STOCK_STATIC_MK2_parent

(3 reviews)

$ 43.18

Find the perfect alignement when aiming down sight (ADS). Finetune your VR gunstock by adjusting the cheek-rest up and down.

View

In stock

Spare parts

Slider spare for Adjustable stock MK2

Any HMD

STOCK_STATIC_MK2_SLIDER_CAR_

$ 10.79

This is spare parts for the MK2 shoulder stock: the adjustable slider. To be honest, you shouldn't have to buy it. We put it there to show that our products are repairable. If you are under our 2 years warranty, contact our Customer Service.

In stock

SWINGiT Golf

SWINGiT! Golf Security clamp

Any HMD

SWING_GOLF_CLAMP_CAR_

$ 8.64

These are spare parts for our products: security clamp for the SwingIt Golf club. To be honest, you shouldn't have to buy it. We put it there to show that our products are repairable. If you are under our 2 years warranty, contact our Customer Service.

In stock

SWINGiT Golf

SWINGiT! Golf Handle without cup

Any HMD

SWING_GOLF_HANDLE_ARMCARBLK_

$ 32.38

The SwingIt Golf Club without controller mount. For those who already own one, just fasten your non-magnetic mount to it.

the rear view of a notched magnetic tenon with a sight on the magnet

In stock

Spare parts

Retainer for bracket

Any HMD

TENON_parent

$ 8.64

The retainers are the components linking the controller mounts to the brackets. To be honest, you shouldn't have to buy it. We put it there to show that our products are repairable. Contact our Customer Service and we will see how to help you.

View

Product added to wishlist

Using our site means you agree
to our terms and conditions
and the use of cookies.

Home

Flexible core for ProTas

Adherent pad for ProTas

Velcro strips for ProTas

Clamp for ProVolver

Shoulder stock extension for ProVolver

ProVolver Front Extension without cup

ProVolver haptic module without rear cup

Rail for ProVolver

Slide for ProVolver

Support handle without bracket for ProVolver

Wrist Support for ProVolver handgun

Tube connectors

Sling for gunstock comfort and security

Sling ring

SMG and Rifle shoulder stock extension for Starter

Stock Extension Connector

Haptic Stock ForceTube with recoil and rumble

Static shoulder stock MK1

Butt plate without slider for the Adjustable Stock MK2

Adjustable shoulder stock MK2

Slider spare for Adjustable stock MK2

SWINGiT! Golf Security clamp

SWINGiT! Golf Handle without cup

Retainer for bracket

Home

Subscribe to the newsletter and receive 10% discount code on your first order

About us

VR accessories

Player corner

Business corner

©2016-2025 - ProTubeVR™ | Terms of sales | Shipping and duties | Warranty | Return and Refund